CAMLOCK ADAPTER PART A
CAMLOCK ADAPTER PART A is available from the size of ½” to 6” in NPT & BSP threads.
Type A stainless steel camlock couplings have male adaptors & female threads of the same size. The male grooved end can be inserted into any female couplers such as Type D, B, C & Dust Cap with identical size. Various gaskets are provided. Standard Buna-N, EPDM, PTFE, food grade silicone gaskets are used in different applications. Make sure the materials are compatible with the media to be transported.
We supply Camlock Fittings in Aluminium, Stainless Steel & Brass material.
CAMLOCK COUPLER PART B
CAMLOCK COUPLER PART B is available from the size of ½” to 6” in NPT & BSP threads.
Camlock coupler part B – Female coupler by Male NPT/BSP Thread, is often used with Part F, A and E adapters of the same diameter. The adapter and coupler are joined together after the contact is made with the gasket like Buna – N or other gaskets. Then close the cam arms simultaneously to produce a uniform seal against the gasket.
Camlock couplings are widely used in PVC suction hoses, lay flat discharge hoses of pumps, tanks & IBCs. Simple operation saves you a lot of time and hand pressure is enough to install the coupling.
We supply Camlock Fittings in Aluminium, Stainless Steel & Brass material.
CAMLOCK COUPLER PART C
CAMLOCK COUPLER PART C is available from the size of ½” to 6”.
Type C camlock couplers – Female coupler by hose tail, are normally used with Type E, A, F and DP (Dust Plugs) of the same size. They consists of two components – coupler and adapter.
Insert the adaptor into the coupler and when the adaptor contact with the sealing gaskets, put down the arms. The whole sealing process is quite easy and cost you less time.
We supply Camlock Fittings in Aluminium, Stainless Steel & Brass material.
CAMLOCK COUPLER PART D
CAMLOCK FEMALE COUPLER PART D is available from the size of ½” to 6” in NPT & BSP threads.
Camlock coupler Part D – Female Coupler by Female NPT/BSP, is usually used with Part A, E, F & DP adapters of the identical diameter.
Quick camlock hose coupling simplify connection/disconnection between hoses to pumps, tanks and equipment. You can use hand pressure to complete the sealing process.
We supply Camlock Fittings in Aluminium, Stainless Steel & Brass material.
CAMLOCK ADAPTOR PART E
CAMLOCK ADAPTOR PART E is available from the size of ½” to 6”.
Camlock Adapter E- male adapter by hose shank, is often used with Part C, B, D & Dust Cap of the same diameter. Quick hose camlock couplings save your time of connecting/disconnecting of hoses to pumps, tanks, IBCs and other places.
We supply Camlock Fittings in Aluminium, Stainless Steel & Brass material.
CAMLOCK ADAPTOR PART F
CAMLOCK ADAPTOR PART F is available from the size of ½” to 6” in NPT & BSP threads.
Camlock Coupling Adapter F – fit into any female couplers including Type C, D, B & DC (Dust Cap). Quick hose camlock coupling can finish sealing in a snap without any requirement of tools. Stretch the arms of the coupler, and then insert the adapter into the coupler until contact with the gasket. The whole process of cam & groove connection will last several seconds.
We supply Camlock Fittings in Aluminium, Stainless Steel & Brass material.
CAMLOCK COUPLER PART DC
CAMLOCK COUPLER PART DC is available from the size of ½” to 6”
Camlock Coupler Part DC are typically used with Type A, E & F adapters to seal the end of the connection. A complete camlock coupling consists of a coupler and an adapter. You just need insert the adapter to the related coupler and put down the arms when the adapter contacting with the gasket to complete the sealing process.
We supply Camlock Fittings in Aluminium, Stainless Steel & Brass material.
CAMLOCK ADAPTOR PART DP
CAMLOCK ADAPTOR PART DP is available from the size of ½” to 6”
Camlock male end adapter Part DP is designed for usage with Type B, C & D couplers to seal the end of the connection.
We supply Camlock Fittings in Aluminium, Stainless Steel & Brass material.
